SIMADRE 5200D 110V/220V 50A PLASMA CUTTER 200A TIG ARC MMA WELDER - Big Sale

SIMADRE 5200D 110V/220V 50A PLASMA CUTTER 200A TIG ARC MMA WELDER - Big Sale
Item# SIMA-CT5200D
Regular price: $849.99
Sale price: $549.99

Product Description

• This is a powerful SIMADRE CT5200D DUAL 110/220V 200 AMP TIG/ARC/MMA WELDER and 50 AMP PLASMA CUTTER - BRAND NEW 2014 MODEL !!!

• This machine is brand new and tested before shipping which assures that you do not receive a DOA unit. The percentage of deffective units is below 1%

• High working efficiency, DC output

• 3" Per minute at 1" Steel (Severance Cut), 7" Per minute at 3/4" Thick Steel, 17" Per minute at 1/2" Thick Steel

• Machine size is 21 inches long x 8 inches wide x 11 inches high. This machine comes with powerful torch, ground clamp and cables, air filter/regulator and free consumables.

• Machine is equipped with a large cooling fan.

• Machine is Thermostatically protected for larger life span

• Machine is with advanced inverter technology and high cutting frequency - V-MOSFET from TOSHIBA/FUJI.

• Affordable: In terms of the quality and performance, it is similar and in some cases surpasses well known USAmade machines. You'll find the price you'll pay for this machine to be two thirds less than those other brands.

• Works in both 50 and 60 Hz with operating air pressure of 60-75 psi @ 4.5 cfm.

• The newer semiconductor circuits in these machines are designed quite well. With reasonable care it should provide many years of trouble-free service.

• Certification: CE, CCC, CSA and ISO-9001 certification

Specifications:

Input voltage - AC 110/220±15% 50/60Hz

Input Power Capacitance - 7.1 kva

No-load loss(W) - 40

Duty cycle (%) - 60

Power factor - 0.93

Efficiency (%) - 85

Insulation class - B

Protection class - IP21

Input current(A) TIG - 21 MMA - 32 CUT - 28.6

Rated output current TIG - 200A MMA - 200A CUT - 50A

Current range TIG - 15-200 MMA - 15-200 CUT - 20-50

No –load voltage(V) TIG - 62 MMA - 62 CUT - 250

Cut thickness(mm)- 1-16

Arc-leading TIG - HF vibrate MMA - Touch CUT - HF vibrate

Ships with:

• Plasma Cutter - Inverter Unit

• Ground Cable & ground clamp

• Torch with hose

• Electrodes

• Tips

• Ceramic shield cups

• Air filter/regulator, hose, clamps, mounting bracket

• Owner’s manual

Buyer shall provide:

• Air supply required - 4.5 CFM @ 75 PSI

• 220 or 110 VAC power source & plug

Accessories

SG-55 AG-60 Cutting Torch
SG-55 AG-60 Cutting Torch
SG55a
Tig Welding Torch
Tig Welding Torch
TTa
Consumables
Consumables
CONa
Air Regulator
Air Regulator
ARa
Stick Rod Holder
Stick Rod Holder
SRHa
Ground Clamp
Ground Clamp
GCa